Baniar Polymer Products

Product Selection Guide

F-1000

Flame Retardant

Typical bead size (mm):      1.4-2.0
Molding density (g/l):         11-12
Blowing agent (wt%):         > 6
Moisture (wt%):                 < 0.80

F-2000

Flame Retardant

Typical bead size (mm):      0.9-1.4
Molding density (g/l):         12-14
Blowing agent (wt%):         > 6
Moisture (wt%):                 < 0.80

F-3000

Flame Retardant

Typical bead size (mm):      0.7-1.0
Molding density (g/l):         14-16
Blowing agent (wt%):         > 6
Moisture (wt%):                 < 0.80

F-4000

Flame Retardant

Typical bead size (mm):      0.5-0.8
Molding density (g/l):         16-18
Blowing agent (wt%):         > 6
Moisture (wt%):                 < 0.80

F-1000 (Non-HBCD)

Flame Retardant

Typical bead size (mm):      1.4-2.0
Molding density (g/l):         12-13
Blowing agent (wt%):         > 6
Moisture (wt%):                 < 0.80

F-2000 (Non-HBCD)

Flame Retardant

Typical bead size (mm):      0.9-1.4
Molding density (g/l):         13-15
Blowing agent (wt%):         > 6
Moisture (wt%):                 < 0.80

F-3000 (Non-HBCD)

Flame Retardant

Typical bead size (mm):      0.7-1.0
Molding density (g/l):         15-17
Blowing agent (wt%):         > 6
Moisture (wt%):                 < 0.80

F-4000 (Non-HBCD)

Flame Retardant

Typical bead size (mm):      0.5-0.8
Molding density (g/l):         17-19
Blowing agent (wt%):         > 6
Moisture (wt%):                 < 0.80

P-1000

High Expansion

Typical bead size (mm):      1.4-2.0
Molding density (g/l):         10-11
Blowing agent (wt%):         > 6
Moisture (wt%):                 < 0.80

P-2000

High Expansion

Typical bead size (mm):      0.9-1.4
Molding density (g/l):         11-13
Blowing agent (wt%):         > 6
Moisture (wt%):                 < 0.80

P-3000

High Expansion

Typical bead size (mm):      0.7-1.0
Molding density (g/l):         13-15
Blowing agent (wt%):         > 6
Moisture (wt%):                 < 0.80

P-4000

High Expansion

Typical bead size (mm):      0.5-0.8
Molding density (g/l):         15-17
Blowing agent (wt%):         > 6
Moisture (wt%):                 < 0.80

SE-1000

Standard Expansion & FR

Typical bead size (mm):      1.2-2.0
Molding density (g/l):         18-19
Blowing agent (wt%):         > 5
Moisture (wt%):                 < 0.80

SE-2000

Standard Expansion & FR

Typical bead size (mm):      0.8-1.2
Molding density (g/l):         19-21
Blowing agent (wt%):         > 5
Moisture (wt%):                 < 0.80

SE-3000

Standard Expansion & FR

Typical bead size (mm):      0.4-0.9
Molding density (g/l):         21-23
Blowing agent (wt%):         > 5
Moisture (wt%):                 < 0.80

SE-4000

Standard Expansion & FR

Typical bead size (mm):      0.3-0.5
Molding density (g/l):         23-25
Blowing agent (wt%):         > 5
Moisture (wt%):                 < 0.80